Connecting the trandsducer

To connect a 0-10V current transducer to an analogue input, you will need the following:

• A current transducer that is compatible with the current range being measured and output of 0-10V DC.
• An Evocon device with a free input 3.
• Wiring and a male 4-pin M12 connector.

Most commonly used CTs for Evocon are rated at 25A/0-10V or 50A/0-10V.

Input 3 has the same "mapping" for both digital and analogue modes.

• Pin 1 - Brown - +24V from device. Not connected.
• Pin 2 - White - Not connected.
• Pin 3 - Blue - 0V of the device power supply.
• Pin 4 - Black - Input. On input 3 works as an Analog input (0-10V).

Transducers can have different markings for the terminals.

For the one in the picture above, we have l and k terminals.